102- Automotive Engine Actuators Diagnostic Online Course

Practical Course on All Engine Actuators Diagnostic

Course Instructor

Mechanicourse Mechanicourse Author

Lifetime

SALE $69.90 $42.90

Course Information:

Engine Actuators Diagnostic Course Includes:

  • 4.0 Hours On-Demand Video
  • Full Lifetime Access
  • Hands-on practical lessons
  • Presented by Dealerships Master Technicians
  • Extensive information on wiring diagrams.
  • Diagnostic with multimeter, scan tool and Oscilloscope.
  • Certificate of Completion (After Watching each lecture, please mark the video as “Completed” to get the certificate of completion after completing all videos.
  • Any question about this course? Let us know: Training@Mechanicourse.com

This course explains everything about each single actuator on automotive engines.

We have covered everything you need to test and diagnose the actuators, this includes:

– Identifying the actuators and their locations

– Understanding how each actuator works

– Understanding the actuators wiring and diagram, and how to identify each wire on them.

– Testing each actuator with a multimeter.

– Using a scan tool to read the live data in order to diagnose the actuators.

– Using an oscilloscope to read and analyze the waveforms on actuators and diagnose them using the waveform.

There are many practical activities in this course. So, after understanding the actuators operation, we locate and check each one on the car, and on each step, we use the wiring diagrams for that exact car, to practice how to use the diagrams for diagnosing a car.

We also use different type of tools and equipment including multimeter, oscilloscope and scan tool.

– Throttle Body Actuator

– Variable Intake Manifold System

– Variable Valve Timing (Including the VVT Phaser & Solenoid Valves)

– Purge Control Solenoid Valve

– Ignition Coil Packs (Wasted Spark)

– Coil on Plug with Two Wires

– Coil on Plug with Three Wires

– Coil on Plug with Four Wires (Smart Ignition Coils)

– Port Injectors

– GDI Injectors

– GDI High Pressure Pump

– GDI Fuel Pressure Control Valve

– Idle Air Control Valve

Course Introduction

Ignition Coils

1
0
0
0
0
1
0
0
0
0
0
0

Variable Intake Manifold System

0
0
0
0

Electronic Throttle Body Actuator

0
1
0

Variable Valve Timing & Oil Control Valve

0
0
0
0
0
0
0
0
0
0
0

Purge Control Solenoid Valve (EVAP Canister Purge Valve)

0
0
0
0
0

Idle Air Control Valve

0
0

Fuel System

0
0
0
0
0
0
0
0
0
0
0

FAQs

Q: Can I learn Engine Actuators diagnostics online?
A: Yes. This course teaches everything from basics to advanced on real cars. We explain each actuator operation, schematics and diagnostic procedure. Many hands-on lesson that show the actual diagnostic on real cars with real diagnostic tools will help you understand the real diagnostic procedure.

Q: How long does the Engine actuators course take?
A: Approximately 4 hours of video content, but you have lifetime access.

Q: Are wiring diagrams explained for engine actuators too?
A: Yes. Understanding the wiring diagrams is very important for engine actuators diagnostic, not only we explain the diagrams, but also we use the schematics in actual diagnostics on real cars.

Q: Is this course useful for beginners too?
A: Yes. We provide all details for each actuator including the operation and diagnostic procedure which is helpful for all skill levels.

Q: Do you teach how to diagnose the engine actuators with oscilloscope too?
A: Yes, we have covered diagnostics on some actuators using oscilloscope to explain how to read the waveforms, how to analyze them and how to use them for actual diagnostics.

Tags:

2 Responses

  1. Highly recommended for any automotive technician who wants to improve their diagnostic abilities and stay up to date with modern vehicle technology.

  2. This is the best engine diagnostic training I’ve seen. The combination of scan tool data, oscilloscope testing, and practical fault diagnosis is perfect.

Leave a Reply

Your email address will not be published. Required fields are marked *