How to Use an Oscilloscope for Automotive Diagnostics
How to Read & Analyze the Waveforms on Any Component & Network
Course Instructor
Lifetime
SALE
$65.00
$39.90
Course Information:
This Course Includes:
- More Than 3 Hours On-Demand Video
- Full Lifetime Access
- Certificate of Completion (After Watching each lecture, please mark the video as “Completed” to get the certificate of completion after completing all videos.
- Any question about this course? Let us know: Training@Fix-It-First.com.au
Course Introduction
This course covers everything about using an oscilloscope for automotive diagnostics.
We started by explaining how to set up the oscilloscope on the car and how to adjust the settings. Then we go for reading and analyzing the waveform on multiple systems and components. In each step, we provide additional information, including the wiring diagrams too, as this will help for a better understanding of what we will do.
Here are the list of the waveforms that we have covered in this course:
- How to set up the oscilloscope
- How to read and analyze the waveform on ignition coils (Coil on plugs with two pins)
- How to read and analyze the waveform on ignition coils (Coil on plugs with Three pins)
- How to read and analyze the waveform on ignition coils (Coil on plugs with Four pins)
- How to read and analyze the waveform on Camshaft Position Sensor
- How to read and analyze the waveform on Crankshaft Position Sensor
- How to read and analyze the waveform on Camshaft / Crankshaft Position Sensors (For Engine Timing)
- How to read and analyze the waveform on PWM Accelerator Pedal Sensor
- How to read and analyze the waveform on High-Speed CAN-Bus
- How to read and analyze the waveform on Low-Speed CAN-Bus
- How to read and analyze the waveform on LIN-Bus
- How to read and analyze the waveform on LIN-Controlled Alternator
- How to read and analyze the waveform on K-Line
- How to read and analyze the waveform on Port Injectors (Voltage & Current Waveforms)
- How to read and analyze the waveform on GDI Injectors (Voltage & Current Waveforms)
- GDI Fuel Pressure Control Valve Waveform Analysis
- Variable Valve Timing Solenoid Waveform Analysis
- Relative Compression Pressure Test
- Battery, Cranking and Charging System
Introduction
Introduction
How to set up the oscilloscope
Ignition Coils Waveforms
Coil on Plug with Two Wires
Coil on Plug with Three Wires
Coil on Plug with Four Wires (Smart Ignition Coils)
Injectors Waveforms
Port Injectors Diagnostic With Oscilloscope – Voltage Waveform
Port Injectors Voltage & Current Waveforms
GDI Injectors Voltage & Current Waveforms Introduction
GDI Injectors Diagnostic with Oscilloscope – Voltage Waveform
GDI Injectors Voltage & Current Waveforms
Automotive Network Diagnostic With Oscilloscope
High-Speed CAN-BUS Diagnostic with Oscilloscope
Low-Speed CAN-BUS Diagnostic with Oscilloscope
LIN-BUS Diagnostic with Oscilloscope
LIN-Controlled Alternator Diagnostic with Oscilloscope
K-Line Diagnostic with Oscilloscope
Engine Sensors and Actuators
Crankshaft Position Sensor Waveform Analysis
Camshaft Position Sensor Waveform Analysis
Crankshaft – Camshaft Correlation Waveform Analysis
PWM Accelerator Pedal Position Sensor Diagnostic with Oscilloscope
Fuel Pressure Control Valve Waveform on GDi High Pressure Pump
VVT Solenoid Valves Waveform Analysis
More Waveform Analysis
Relative Compression Pressure Testing
Battery, Cranking and Charging System Monitoring
6 Responses
I learned a lot from this course, explaining the waveform at the beginning and reading that on the actual cars was very helpful.
Hi my friend,
Thank you for your feedback. We are glad you enjoyed the course.
hi can you post in udemy courses then i can pay there
Hi There,
Thank you for considering our online courses.
We do not publish our new courses on Udemy anymore. All courses will be published only on our official website including this courses that you are interested in.
Amazing course. I very much like the practical approach in this course which shows everything an the real car and real components which made it much easier for me to understand. Thank you
Hi there,
Thank you for taking this course.
It’s great to here that you found the course helpful.
In all our online courses we try to have as many practical lectures as possible to enhance the learning experience of those friends who take the course and it’s amazing that we see this practical approach is working.